• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

DSM300 mounting

GPS, Sonar, Radar, Fishfinder, etc. Discuss electronics installation and upgrades.
Post Reply
User avatar
Nowhere Special
Gold Member
Gold Member
Posts: 62
Joined: Thu Apr 02, 2009 5:56 pm
Home Port: Catawba Island, Lake Erie

DSM300 mounting

Post by Nowhere Special »

I've finally finished mounting the new transducer in hull. I have been looking for a good place to mount the DSM300. My TE has and engine box. I thought of below the helm seat but that would put it too close to the fluxgate compass. Any suggestions would be appreciated.

Dave
Dave
1999 28TE Aba Daba
Top
User avatar
RobS
Gold Member
Gold Member
Posts: 4040
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:
Contact RobS

Re: DSM300 mounting

Post by RobS »

If you pull out the drawer unit under the starboard helm seat there is oodles of room under there but if the fluxgate is an issue you can try behind the port or starboard side panel behind the sliding windows
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Top
Post Reply

Return to “Electronics”