Have anyone seen a source of the style of finishing washers used in the A25 for the grab rails? The ones i can find are simple cups and not clised on the face like the ones in the boat. Some of mine are a bit sad. I also need to replace a few screws.
Ulf
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Finishing washers?
-
tribologist
- Gold Member
- Posts: 972
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Finishing washers?
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
DesertAlbin736
- Gold Member
- Posts: 2729
- Joined: Sun Mar 09, 2014 3:58 pm
- Home Port: Peoria, AZ USA
Re: Finishing washers?
"Clised"??? You're talking about the grab rail screws & trim washers that go up though the overhead from inside the cabins & pilothouse? What's wrong with standard s/s oval head screws & trim washers you can get from West Marine, Lowe's, or Home Depot?
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
-
tribologist
- Gold Member
- Posts: 972
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: Finishing washers?
I like the flat bottom ones 
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct
-
Beta Don
- Gold Member
- Posts: 619
- Joined: Mon Aug 17, 2015 1:44 pm
- Home Port: Biloxi MS
Re: Finishing washers?
When I was refitting our A27, I bought all my stainless hardware on eBay. Bolts, screws nuts and washers. Boxes of 50 pieces often cost less than a pack of 10 from Lowes
It's all there and available from USA sellers if you search using the right words
Don
It's all there and available from USA sellers if you search using the right words
Don
1984 A27 FC #116 'Beta Carina'
Yanmar Turbo Intercooled 100 HP
Homeport Biloxi Back Bay
Yanmar Turbo Intercooled 100 HP
Homeport Biloxi Back Bay
-
tribologist
- Gold Member
- Posts: 972
- Joined: Wed Jul 18, 2018 11:53 pm
- Home Port: Groton. Ct
Re: Finishing washers?
I ended up using finishing washers from mcmaster.com. Looked for a while for the fancy ones with flat face but no luck....
Ulf
Ulf
Driftless
A25 1971 #737
South Windsor, Ct
A25 1971 #737
South Windsor, Ct