• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Albin 25 fuel gauge help

Albin's "power cruisers"
DesertAlbin736
Gold Member
Gold Member
Posts: 2729
Joined: Sun Mar 09, 2014 3:58 pm
Home Port: Peoria, AZ USA

Re: Albin 25 fuel gauge help

Post by DesertAlbin736 »

Dave's (dkirsops) wiring panel looks very neat & clean. Note his yellow (-) ground wires, as per current ABYC code. Nicely done! Yellow rather than black so as not to be confused with hot side of AC shore power circuits.

Here's our before & after as part of the 2016 holding tank project. Not quite as good as Daves.
DSCN3367.JPG
20161220_152559.jpg
Note at left in the before picture the funky & scary shore power setup. Now we have this double pole EFCI breaker panel with galvanic isolator (not shown in photos) in the green wire AC safety ground circuit. In upper right the "after" photo of the wiring panel taken 3 years ago the engine hour meter can be seen reading 897 hours. As of last log entry it now reads 1,189 hours.
DSCN3410.JPG
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
Post Reply

Return to “A25 / A27 - True Classics”