Has anyone replaced the side window slides? Mine are working but really ratty, and need replacing. Would any advice on replacement.
Also: How do I get the glass out? Mine seems to be just oversized to pop out as I would expect.
Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
A27 Window Slides
-
DCatSea
- Gold Member
- Posts: 900
- Joined: Wed Aug 20, 2014 9:53 pm
- Home Port: Alexandria VA
- Location: Alexandria VA
A27 Window Slides
Doug and Georgia
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03
-
JimCoughlin
- Gold Member
- Posts: 27
- Joined: Sun Mar 24, 2019 2:40 pm
- Home Port: Cape Cod
Re: A27 Window Slides
I have the same problem with my 1997 28TE. I found a source for the channel. Steele Rubber Products. They provide samples. Have yet to start the project so any feedback you get will be very helpful.
-
Sprig1
- Gold Member
- Posts: 390
- Joined: Thu Dec 11, 2014 5:05 am
- Home Port: Long Cove Marina, Chester River Maryland
Re: A27 Window Slides
Doug give me a call I did it. I took the windows out dug out the coring about an inch deep. I put thickened epoxy in the grove. I think I bought the rails at Hamilton marine.
-
JimCoughlin
- Gold Member
- Posts: 27
- Joined: Sun Mar 24, 2019 2:40 pm
- Home Port: Cape Cod
Re: A27 Window Slides
Did you remove interior or exterior window trim to do the job?
-
Sprig1
- Gold Member
- Posts: 390
- Joined: Thu Dec 11, 2014 5:05 am
- Home Port: Long Cove Marina, Chester River Maryland
Re: A27 Window Slides
Yes I removed everything. Sorry about the delay in responding