Hi
Does anybody know the shaft size ( dia & taper) and prop size for an Albin 28 TE (1999) fitted with a Cummins 370hp.
The boat is in the water ( hence why I need sizes) as I want to order a prop for a quick change over.
Regards
Mark
Tel: 07713 629624
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin 28 shaft & prop size
-
Misterpilot72
- Swabby
- Posts: 3
- Joined: Mon Feb 12, 2018 6:53 pm
- Home Port: Clyde
-
jetter
- Gold Member
- Posts: 88
- Joined: Sat Jan 21, 2012 9:33 pm
- Home Port: Skerryvore , Ontario
- Location: Creemore, Ontario
Re: Albin 28 shaft & prop size
Check thread viewtopic.php?f=5&t=9745 You will note that pitch appears to depend on transmission gear as mine is different from Pictou.
Russell