Albin Owners Group

Expoguy · Post by **Expoguy** » Fri Dec 21, 2018 4:00 pm

I am looking at HIN# AUL28523E001 and wanted to see if this would be a balsa wood core or not ?

Post by **DougSea** » Fri Dec 21, 2018 8:52 pm

Expoguy wrote: ↑Fri Dec 21, 2018 4:00 pm I am looking at HIN# AUL28523E001 and wanted to see if this would be a balsa wood core or not ?

So that makes her a 2001 model manufactured in May of 2000. According to the post at the end of this thread that's about the time Albin switched core material.

viewtopic.php?f=5&t=9745&p=64970&hilit= ... +te#p64970

So it could be either.

Personally - as long as the thru hulls look good (The ones to really check are the ones added later, such as the transducer) and the survey doesn't turn up any moisture issues it would be a non factor either way. I wouldn't hesitate to buy another balsa cored boat.

Post by **Mar Azul** » Wed Dec 26, 2018 4:57 pm

My 2000 te28 HIN # is AUL28471I900 and is foam cored

Albin Owners Group

Albin Owners Group

HIN

HIN

Re: HIN

Re: HIN