• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Rub Rails for 31 TE
-
sharffj
- First Mate
- Posts: 109
- Joined: Sat Jun 20, 2009 12:55 am
Rub Rails for 31 TE
My rubber rub rails is being to deteriorate from too much sun and weather. Anyone know where I can get a new one if I decide to go that route?
-
DougSea
- Gold Member
- Posts: 2759
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Rub Rails for 31 TE
Don't know the answer - but I'd think you could unscrew the trim cap at an end and get some measurements and photos of the profile. Then search online or at your favorite local marine store.
Also possible that you could peel it part way out and check for a manufacturers mark on the reverse side.
Also possible that you could peel it part way out and check for a manufacturers mark on the reverse side.
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
-
DougSea
- Gold Member
- Posts: 2759
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Rub Rails for 31 TE
I was in my local West Marine today and I spotted a display with a large selection of rub-rail profiles.
So I'm doubling down on my recommendation to pull off the end cap and get some pics and measurements.
I'm thinking there's a good chance they can match it!
So I'm doubling down on my recommendation to pull off the end cap and get some pics and measurements.
I'm thinking there's a good chance they can match it!You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"