New storage area on 28 Te

Post some pics of your Albin
Post Reply
Rabiss
Supporting Member
Supporting Member
Posts: 40
Joined: Mon Apr 10, 2017 10:10 pm
Home Port: Port Charlotte Fl

Mon Oct 02, 2017 5:26 am

Made a storage area in me 28 te
You do not have the required permissions to view the files attached to this post.
Randy
06 Albin 28

User avatar
drbob
First Mate
First Mate
Posts: 97
Joined: Mon Aug 10, 2015 2:58 pm
Home Port: Cape Harbour, Cape Coral, FL
Location: Cape Harbour, Cape Coral, Florida
Contact:

Mon Oct 02, 2017 2:40 pm

I like it!

Rabiss
Supporting Member
Supporting Member
Posts: 40
Joined: Mon Apr 10, 2017 10:10 pm
Home Port: Port Charlotte Fl

Mon Nov 20, 2017 5:32 pm

Add more storage to the Albin. Tackle storage and foot rest at the helm
image.jpeg
image.jpeg
You do not have the required permissions to view the files attached to this post.
Randy
06 Albin 28

Nancy
Gold Member
Gold Member
Posts: 1046
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Mon Nov 20, 2017 8:21 pm

We fabricated a wood shelf for the port compartment under the dinette settee. It's supported by a wood cleat. This is one of the best and simplest improvements we've made to the boat.

dinette settee shelf-1-082812-1600.JPG
dinette settee shelf-2-082812-1600.JPG
You do not have the required permissions to view the files attached to this post.
Nancy
1995 Albin 28TE
Cummins 6BTA5.9 250
Nancy Lee

Rabiss
Supporting Member
Supporting Member
Posts: 40
Joined: Mon Apr 10, 2017 10:10 pm
Home Port: Port Charlotte Fl

Mon Nov 20, 2017 8:50 pm

Good idea Nancy
Randy
06 Albin 28

User avatar
Norseman
Gold Member
Gold Member
Posts: 632
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Fort Lauderdale
Location: Fort Lauderdale, zip 33315
Contact:

Tue Nov 21, 2017 10:16 am

Great idea on the storage, thx.
As for the foot rest box: My 2001 has a fold-down floor plate, I thought it was stock, but perhaps previous owner made it....?
2001 28TE, 6LP-STE, 1,073.7 hrs. 19X18 four-blade wheel.

User avatar
Sisu22
Supporting Member
Supporting Member
Posts: 185
Joined: Sun May 07, 2017 6:50 pm
Home Port: Ventura, CA

Tue Nov 21, 2017 1:51 pm

No, I think those fold up ones were standard for the earlier 28 TE's (I have one as well there).

Rabiss - was that custom - made?
1994 TE 28' w/ Cummins 250

User avatar
Norseman
Gold Member
Gold Member
Posts: 632
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Fort Lauderdale
Location: Fort Lauderdale, zip 33315
Contact:

Tue Nov 21, 2017 4:09 pm

Sisu22 wrote:
Tue Nov 21, 2017 1:51 pm
No, I think those fold up ones were standard for the earlier 28 TE's (I have one as well there).

Rabiss - was that custom - made?
Looking at Randy’s deck hatch, I am guessing Flush Deck?
If so, the whole deck was probably raised a few inches to make room for the engine and a foot plate may not have been needed anymore?
2001 28TE, 6LP-STE, 1,073.7 hrs. 19X18 four-blade wheel.

Rabiss
Supporting Member
Supporting Member
Posts: 40
Joined: Mon Apr 10, 2017 10:10 pm
Home Port: Port Charlotte Fl

Wed Nov 22, 2017 3:14 pm

I made it Sisu 22
I have a flush deck
Randy
06 Albin 28

User avatar
RobS
Gold Member
Gold Member
Posts: 3799
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Fri Nov 24, 2017 8:42 am

The reason there is no flip down foot platform on the flush deck is not the deck height. It's the fact that on the engine box model the captains chair was mounted on a molded in fiberglass stanchion (for lack of a better word) and the platform bridged the helm bulkhead to the stanchion. On the FD model there is no such stanchion because the deck is hinged for engine access, so the captains chair is simply pedestal mounted. The foot rest was instead implemented into the pedestal.

Here's a shot from my engine box model
pilothouse overview.jpg
And a couple of the flush deck
FD pilothouse overview (01).jpg
flush deck captains chair (01).jpg
You do not have the required permissions to view the files attached to this post.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.

Millertime
Swabby
Swabby
Posts: 4
Joined: Sun Jul 08, 2018 4:42 pm
Home Port: Bradenton Florida
Location: Bradenton Floria

Mon Jul 09, 2018 10:57 am

Looking to bring AC to the helm station. I saw one 28' that piped with 4" PVC thru the port starboard side of the head & then into the bath cabinet. Not sure where it went next but vented next to the Captains chair. Any suggestions???

Post Reply

Return to “Pictures”

  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest