• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Transmission ID 28TE

Post Reply
Nancy
Gold Member
Gold Member
Posts: 1807
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Transmission ID 28TE

Post by Nancy »

We know our boat has a Hurth transmission because we have the manual, but it covers about eight different models. Can anyone tell me where the transmission identification plate is located? Of course the tranny is mostly hidden under the sole forward of the engine, and in the center bilge between the two helm chairs, there is a plywood partition exactly like Joe's (viewtopic.php?f=5&t=5336&p=31656&hilit= ... ion#p31656), so visibility is extremely limited. I don't want to remove the plywood only to find that the ID plate isn't there.

What we really want to know is the transmission ratio. Any chance that the transmission on our boat would be the same as another 1995 vintage Cummins 6BTA M1?
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
User avatar
RobS
Gold Member
Gold Member
Posts: 4041
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Transmission ID 28TE

Post by RobS »

Your vintage TE with a Cummins is likely a 1.4 ratio. The plate may be hiding under your tranny cooler. You can also just see my plate in the pictures I posted in the thread you referenced.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Nancy
Gold Member
Gold Member
Posts: 1807
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Re: Transmission ID 28TE

Post by Nancy »

Thanks, Rob. Goodbye, plywood partition.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
User avatar
DougSea
Gold Member
Gold Member
Posts: 2759
Joined: Tue Jun 13, 2006 9:45 am
Home Port: Safe Harbor - Essex Island Marina, Essex, CT
Location: Essex, Connecticut

Re: Transmission ID 28TE

Post by DougSea »

Nancy wrote:Thanks, Rob. Goodbye, plywood partition.
I've found that I can reach all kinds of hidden areas with my phone or a compact camera. A firm grip and paying attention to where I'm aiming it and I've seen all kinds of "invisible" areas of my boats! You might try that before pulling pieces out...
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
User avatar
RobS
Gold Member
Gold Member
Posts: 4041
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Transmission ID 28TE

Post by RobS »

Or a mirror and flashlight..
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Nancy
Gold Member
Gold Member
Posts: 1807
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Re: Transmission ID 28TE

Post by Nancy »

Thanks, I thought of the camera, mirror/flashlight approach. There is absolutely no room. And if there were, my arms aren't long enough. :x
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
User avatar
RobS
Gold Member
Gold Member
Posts: 4041
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Transmission ID 28TE

Post by RobS »

I do recall the 6B being a bit of a tight fit..
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
N4QC
Gold Member
Gold Member
Posts: 215
Joined: Tue Aug 15, 2006 8:56 pm
Location: Tampa Bay

Re: Transmission ID 28TE

Post by N4QC »

A handy tool from Harbor Freight is the digital inspection camera. It has a probe about 40" long. Good for those of us who have lost their contortionist license. On sale this week for about $90 - till 7/15/12. A 20% off coupon might also be applicable.

Have fun,
Joe
Albin Getaway
"LabTime"
Nancy
Gold Member
Gold Member
Posts: 1807
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Re: Transmission ID 28TE

Post by Nancy »

Great find, Joe - thanks!

We found the ID plate. Turns out it's visible (I use that term loosely) from the engine box. Ours was covered with nice white engine paint. After scraping the paint off, you can read half the label from the port side of the engine and half from the starboard side....with a mirror and flashlight. Such fun!

And yes, it's a 1.4.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
poillon1

Re: Transmission ID 28TE

Post by poillon1 »

We have a 330 Cummins (6BT 5.9-M3) on our 1998 28 TE and did major maintanence last year. The Hurth was HSW 800 V1 - ratio 1.40:1 (our serial number 05-36480). Hope that helps. Nannette McCoy
Post Reply

Return to “Tournament Express 26-35”