I've seen several comments that the grey non-skid is actually gelcoat. We're having a bimini and full enclosure made and we're going to have a few filled holes in the non-skid on the gunnel that will need to be matched, as well as 1 or 2 small chips around the boat to be fixed.
So the questions are:
1. If it's gelcoat, is there a source that's pre-mixed/colored?
2. If it's paint, any source for this pre-mixed? Or at least the mixing details?
I really want to touch-up vs having to redo all the non-skid as a project at this time.
Thanks in advance for this board's great assistance.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos