sorry for so many posts today, but boating season is near!
I'm getting a pretty constant stream of water leaking from the rudder post causing the bilge pump to kick on daily. The packing nut is tightened all the way down, so I'm planning on getting her on the grid and replacing the packing.
Just so I'm prepared, does anyone know the size packing I need to buy for the for a 28TE rudder?
Thanks,
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Rudder packing size
-
Robb
- Gold Member
- Posts: 83
- Joined: Mon Oct 31, 2011 2:44 pm
- Home Port: Tacoma, WA
Rudder packing size
Robb Stilnovich
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
-
Robb
- Gold Member
- Posts: 83
- Joined: Mon Oct 31, 2011 2:44 pm
- Home Port: Tacoma, WA
Re: Rudder packing size
If no one knows the packing size, does anyone know how to determine the correct size? The exact size of the "gap" or larger and push in?
Robb Stilnovich
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
-
RobS
- Gold Member
- Posts: 4041
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Rudder packing size
Call Ken at Standish, (401) 624-4075
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
DougSea
- Gold Member
- Posts: 2759
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Rudder packing size
Rob! You don't know?? I'm shocked! Shocked I tell you!!RobS wrote:Call Ken at Standish, (401) 624-4075
I was expecting exact stats and a photo montage of a packing replacement! 
Robb - were you able to track down what you needed?
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
-
RobS
- Gold Member
- Posts: 4041
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Rudder packing size
Good to see my posts and photos don't go un-noticedDougSea wrote:Rob! You don't know?? I'm shocked! Shocked I tell you!!
Have yet to repack my rudder. Probably one of the only things left on her that I haven't either maintained or updated. I have replaced the rudder shoe bearing, steering cylinder and bonding wire and also installed a rudder reference unit, so the rudder hasn't been totally neglected
So, Robb, what's the outcome?
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.