raymarine c120

GPS, Sonor, Radar, Fish Finder, etc. Discuss electronics installation and upgrades.
Post Reply
Gold Member
Gold Member
Posts: 211
Joined: Thu Jul 05, 2007 6:42 pm

I have a 2010 raymarine c 120 on my 28 te what is the best way to upgrade
Posts: 5
Joined: Mon Jul 05, 2021 9:36 pm
Home Port: rowayton CT

I have a 35cb. just went to an Axiom 16 and an Axiom 7 (as a backup on dedicated circuit). I stuck with Raymarine because of transducer and autopilot. the replacement of the c120 with an Axiom 12 is reasonably straightforward but you will spend a bunch on a new network interface and cables to tie it to the old stuff.
Gold Member
Gold Member
Posts: 1607
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Define "best". :D
More parameters would be helpful. Budget? Helm real estate? Post a photo? A previous owner of our boat upgraded the chartplotter/depth sounder/fish finder to a Raymarine eS series (pre-Axiom), and left the old C80 in place for use as the radar unit.
2005 Albin 35CB
Yanmar 6LYA-STP 370

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1993-1997
1980 Wellcraft 192 Classic, 1986-1992
Posts: 6
Joined: Tue Oct 19, 2021 12:38 pm
Home Port: None yet

I chose to get a 12" galaxy tablet to display my charts. I will keep my C 80 unit to support the radar and transducer which seem to work reasonably well. My reasoning is that the charts are probably the most important link for me right now, and the money was less then I would have had to spend if I chose to get a new plotter
I'm interested in the forms reaction

mike m
User avatar
Gold Member
Gold Member
Posts: 1525
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK

I did a full upgrade this year from. E90W with HD colour radar and the old sitex fishfinder. I went full axiom with two 12” screens and tied them in to my existing Raytheon autopilot and AIS. I coupled the two screens, radar and AIS to a Raymarine network switch and back boned the autopilot on with a crossover cable as that was legacy seatalk. Come to think of it the AIS was HSB and that is also on the crossover network. Adding legacy equipment to the latest equipment is easy. My autopilot is essentially NMEA but I converted that to seatalk and the AIS was HSB. The network switch crossover cable is capable of including this so it all communicates seamlessly with the later generation electronics.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Post Reply

Return to “Electronics”