• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Price Check- Auto Pilot

GPS, Sonar, Radar, Fishfinder, etc. Discuss electronics installation and upgrades.
Post Reply
Jkraft
Gold Member
Gold Member
Posts: 489
Joined: Mon Aug 26, 2019 9:22 pm
Home Port: Chestertown, MD

Price Check- Auto Pilot

Post by Jkraft »

Hi all, I received a quote to install autopilot on my 28 albin. The boat has never had it before so its a totally new install. He will be installing the Garmin Reactor 40 Hydraulic Corepack with Smart Pump. Cost on that unit is $3599. He quoted 2.5 -3 days labor and materials the total came to $8,200. Does this seem high?
USCG 100 Ton Master

Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp

Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
User avatar
Tree
Gold Member
Gold Member
Posts: 1587
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Price Check- Auto Pilot

Post by Tree »

Seems massively high. I bought a used Raymarine unit with computer for £500. I bought the pump separately and had the hoses made up at a hydraulic shop. These I did get at trade for about £350. I installed it myself and took less than a day - I’m no marine electrician.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1694
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Price Check- Auto Pilot

Post by Norseman »

. He quoted 2.5 -3 days labor and materials the total came to $8,200. Does this seem high?
Let’s say $120 per hour for a master marine electrician: 7-8 hours maybe if he knows what to do from the beginning?
20 hours if slow and learning?
Not sure, but I would get a second estimate..
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
catalina_mike
Gold Member
Gold Member
Posts: 698
Joined: Mon Mar 09, 2015 11:20 am
Home Port: Dana Point

Re: Price Check- Auto Pilot

Post by catalina_mike »

I am using a old Raymarine ST5000 that came with the vessel from the original owner over NMEA0183 to my new Simrad electronics. Works great... You should be able to install one if you are handy over a weekend.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Jkraft
Gold Member
Gold Member
Posts: 489
Joined: Mon Aug 26, 2019 9:22 pm
Home Port: Chestertown, MD

Re: Price Check- Auto Pilot

Post by Jkraft »

Thank you to all that responded. I just got another quote for the same set up at 1/2 of the cost. That is the route I am going to go.
USCG 100 Ton Master

Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp

Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Larry cessna
First Mate
First Mate
Posts: 53
Joined: Thu Dec 06, 2018 4:12 pm
Home Port: Rock Hall MD

Re: Price Check- Auto Pilot

Post by Larry cessna »

Who did you get the second quote from. I am still looking for a guy to do some work at a reasonable price. I was quoted 10 hours to install a pre wired windless.
Jkraft
Gold Member
Gold Member
Posts: 489
Joined: Mon Aug 26, 2019 9:22 pm
Home Port: Chestertown, MD

Re: Price Check- Auto Pilot

Post by Jkraft »

Larry just send you an email. Highland Marine did it for me
USCG 100 Ton Master

Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp

Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Post Reply

Return to “Electronics”