Just passing on an a plate replacement that I did for about $6. The old wood plate was rotting so I used a piece of thick plexiglass (6mill) and painted the bottom with black Tremclad. I taping off the top glass will painters tape to prevent overspray. I had to use a little silicone to secure the gas gage and I oversized the mounting holes to avoid cracking.
I just need to add navigation and wiper lables to the pull switches. Cheers Sandra
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Gas, Bilge Switch Plate Repair
-
Stapper
- Mate
- Posts: 10
- Joined: Fri Aug 27, 2021 4:48 pm
- Home Port: Lagoon City
Gas, Bilge Switch Plate Repair
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.