• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Slow going... which isn't all bad.

Albin's "power cruisers"
DesertAlbin736
Gold Member
Gold Member
Posts: 2729
Joined: Sun Mar 09, 2014 3:58 pm
Home Port: Peoria, AZ USA

Re: Slow going... which isn't all bad.

Post by DesertAlbin736 »

Then getting an HF/SSB radio and figuring out which antenna and length.
The only need for the sintered bronze grounding plate that I recently removed from the bottom of my boat (broken & leaking into the hull through the attachment bolt holes, a replacement for which would have cost $216) was in case of having an HF/SSB radio. Since I'm not crossing any oceans SSB is not in my future.

I got my FCC license in order to get an FCC MMSI number rather than the US only BoatUS freebie version because we cruise in Canada & with the FCC version the Canadian CG can get our data in case of a DSC distress call.
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
Scudrunner
First Mate
First Mate
Posts: 59
Joined: Sat Nov 05, 2016 9:28 am
Home Port: Searsport, Maine & Jacksonville Beach, Florida
Location: Florida

Re: Slow going... which isn't all bad.

Post by Scudrunner »

Thanks Driftless,
I thought about doing both but would be happy just getting my General. It's been 20 plus years since I took the test for my Tech and have been struggling to get through the practice tests. I did a whole video program but may go through it again and watch the Extra too.

Thanks again,
KC0CIR
tribologist
Gold Member
Gold Member
Posts: 966
Joined: Wed Jul 18, 2018 11:53 pm
Home Port: Groton. Ct

Re: Slow going... which isn't all bad.

Post by tribologist »

If get in to CW you need it.. that call is a knucklebreaker on a straight key… the CIR part Sounds great but the KC0 makes my hand hurt.. lol! On SSB its not bad! I used to be SM3PFT in Sweden then i got a KB1PON here and fortunately K1ULF was free. W1ULF had gone silent key a few years before so i did not want that.. much easier to get ULF than Rob or Bob! Lol!!!’

Ulf
K1ULF
Driftless
A25 1971 #737
South Windsor, Ct
DesertAlbin736
Gold Member
Gold Member
Posts: 2729
Joined: Sun Mar 09, 2014 3:58 pm
Home Port: Peoria, AZ USA

Re: Slow going... which isn't all bad.

Post by DesertAlbin736 »

ULF... Ultra Low Frequency? 😉
La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
tribologist
Gold Member
Gold Member
Posts: 966
Joined: Wed Jul 18, 2018 11:53 pm
Home Port: Groton. Ct

Re: Slow going... which isn't all bad.

Post by tribologist »

I can do 160 KHz.. thats pretty low but not ULF. Just LF….
Driftless
A25 1971 #737
South Windsor, Ct
Post Reply

Return to “A25 / A27 - True Classics”