raw water wash pump
- Pitou
- Gold Member
- Posts: 2039
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Check the transom .. port side. That's where my 2002 (engine box) raw water washdown pump was mounted.
kevinS
"drinking rum before 10AM makes you a Pirate, not an Alcoholic"
~ 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Former boat ~
~ 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April / '04 ~ May / '13
"drinking rum before 10AM makes you a Pirate, not an Alcoholic"
~ 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Former boat ~
~ 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April / '04 ~ May / '13
- catalina_mike
- Gold Member
- Posts: 665
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
My 99 had it mounted to the support by the rudder gear. Back side.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
-
- Supporting Member
- Posts: 135
- Joined: Mon Dec 07, 2020 3:08 pm
- Home Port: Fairhaven, MA
- Location: Falmouth, MA
I have a 2005 flush deck, when I open the fish box hatch, I have four intake valves in a line going from port to starboard, the first is the raw water pump, then the live well pump, the AC and the most starboard side is the engine salt water intake, hope that helps, the salt water pump is tucked a bit more under the deck, can't be seen when I open the hatch, whereas the other three can easily be seen.
Gregg M. Berkley
2005 Albin 28 Flush Deck
Fairhaven, MA
2005 Albin 28 Flush Deck
Fairhaven, MA