• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
28 TE Repower Options
-
EBlake
- Swabby
- Posts: 3
- Joined: Fri Feb 19, 2021 7:37 pm
- Home Port: Melbourne FL
28 TE Repower Options
I have a 1996 28 TE with original Peninsular 310 HP. I am exploring replacing this engine with a like powered engine that will fit and work without rebuilding the bilge. Looking for suggestions hopefully with specification such as ratios, prop, and etc. Or, directions to where I might obtain such information. Any and all information regarding gotchas, special consideration and, or good things is welcomed and will be appreciated.
-
Sisu22
- Gold Member
- Posts: 308
- Joined: Sun May 07, 2017 6:50 pm
- Home Port: Ventura, CA
Re: 28 TE Repower Options
I would start with getting really familiar with this series of vids:
https://www.youtube.com/watch?v=JWT662G ... dMarineInc.
https://www.youtube.com/watch?v=JWT662G ... dMarineInc.
1994 TE 28' w/ Cummins 250
-
EBlake
- Swabby
- Posts: 3
- Joined: Fri Feb 19, 2021 7:37 pm
- Home Port: Melbourne FL
Re: 28 TE Repower Options
Very nice selection of vids with a LOT of very good information, but could not find anything that drilled into the detailed specifications that would be immensely useful in selecting a replacement power train. Thanks for the direction, these will come in handy as I move forward with this project.