Needed info on Cummins engine for Albin 32+2

For 32, 32+2, 35, and 45 owners.
Post Reply
MeyrickP
Gold Member
Gold Member
Posts: 40
Joined: Mon Jan 11, 2010 9:56 pm
Home Port: Stamford CT
Location: Stamford, CT
Contact:

Hi folks. Happy holidays

I am repowering my Albin 32+2 from Yanmar to Cummins.

I badly need information about transmission, gear ratio, and accessories which are dependent on Cummins engine.

Please guide me!
Meyrick Payne
Albin 32+2
"Ancora"
Stamford, CT
hulamoon
Supporting Member
Supporting Member
Posts: 11
Joined: Fri Oct 20, 2017 11:18 am
Home Port: Matawan Creek, New Jersey
Contact:

Hello Ancora,
I repowered my 32 Sportfish with a 6BTA 315hp. I utilized the existing gear and V drive as the boat was previously Cummins powered. I have a Velvet Drive S-7000 gear which has a 1.12/1 ratio coupled to a Walters V-Drive Model RV-50 (jack shaft version) with a ratio of 1.47/1. These two ratio's result in a final reduction of 1.65/1. I re propped to a Dynablade Nibral 21 X 22 4 Blade LH. I fast cruise comfortably at 19 Kts @ 2300 rpm. Max speed is 24 Kts at 2800. Slow cruise is 14 Kts @ 2000 RPM. I hope this helps.
Post Reply

Return to “Command Bridge 32-45”