• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Engine Breaker/ Fuse
Moderator: Jeremyvmd
-
Jkraft
- Gold Member
- Posts: 492
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Engine Breaker/ Fuse
2002- 28 TE with 315 Yanmar 6LP - Doing some electrical modifications to my boat- specifically, I have changed to all push button electronic switching including those for my ignition, glow plugs, start, & stop. Since the new push button switches do not offer actual switching power, I need to add a relay to make this work. It did get me thinking though, how did Albin protect the line that is going to the ignition switch? Is there a fuse or is it a breaker? If so, where is this typically located?
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
-
Norseman
- Gold Member
- Posts: 1699
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Engine Breaker/ Fuse
There is a built in Yanmar starter relay on the wiring harness, in front (actually back)
of the motor. Not sure if that is what you are looking for, but I always carry a spare with me. (no rope start on the 6LP)
of the motor. Not sure if that is what you are looking for, but I always carry a spare with me. (no rope start on the 6LP)
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
Jkraft
- Gold Member
- Posts: 492
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Engine Breaker/ Fuse
Norseman wrote: ↑Wed Feb 16, 2022 12:23 pm There is a built in Yanmar starter relay on the wiring harness, in front (actually back)
of the motor. Not sure if that is what you are looking for, but I always carry a spare with me. (no rope start on the 6LP)
I do know where the relay is but I’m wondering there the main fuse or circuit breaker for the engine is
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”