• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Removing the table between berths

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
KODIAK
Gold Member
Gold Member
Posts: 11
Joined: Mon Jan 18, 2016 10:55 am
Home Port: Freeport, Maine

Removing the table between berths

Post by KODIAK »

Can the table and it's support base be quickly removed - and then replaced? Before I remove base bolt connections, etc. I'm hoping there may be an easier solution
Top
gmberkley
Gold Member
Gold Member
Posts: 220
Joined: Mon Dec 07, 2020 3:08 pm
Home Port: Fairhaven, MA
Location: Falmouth, MA

Re: Removing the table between berths

Post by gmberkley »

I'm not sure what your trying to accomplish, but I put hinges and a latch on the lid the table based is attached to, when the table is raised, I turn the latch and lift the table up towards the bow, and I can easily access the bilge and new pump I installed there. Not sure if addresses your issue........
Gregg M. Berkley 25 Ton Master USCG
2005 Albin 28 TE Flush Deck
Fairhaven, MA
Top
Nancy
Gold Member
Gold Member
Posts: 1804
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Re: Removing the table between berths

Post by Nancy »

Kodiak - which boat?

Greg - Got a photo? :)
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
Top
Post Reply

Return to “General Discussion”