• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Modifications, repairs and improvements, 28TE
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
Hired a diver to clean the bottom and running gear.
The aluminum anodes lasted 21 months in brackish waters, the zinc anodes about 8-9 months, big difference.
The aluminum anodes lasted 21 months in brackish waters, the zinc anodes about 8-9 months, big difference.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Last edited by Norseman on Sat May 07, 2022 1:19 pm, edited 2 times in total.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
All done with the zincs and the cooling system.
Tried to twist the problematic heat exchanger end cap for easier access to the
end cap zinc pencil, but only had 15-20 degree movement: The problem is the zinc cap is too close to the engine block, can't fit a socket on to it.
I understand some Yanmar owners have no problem, maybe I am just lucky.
(Or I need thin walled socket)
Everything is back together now, 6 new zincs, a new hose, 4-5 new hose clamps, a new gasket, etc.
Tried to twist the problematic heat exchanger end cap for easier access to the
end cap zinc pencil, but only had 15-20 degree movement: The problem is the zinc cap is too close to the engine block, can't fit a socket on to it.
I understand some Yanmar owners have no problem, maybe I am just lucky.
(Or I need thin walled socket)
Everything is back together now, 6 new zincs, a new hose, 4-5 new hose clamps, a new gasket, etc.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Last edited by Norseman on Fri Apr 08, 2022 9:31 pm, edited 1 time in total.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
- GSSeattle
- Gold Member
- Posts: 116
- Joined: Fri Nov 15, 2019 3:37 pm
- Home Port: Anacortes Marina (Anacortes, WA)
- Location: Seattle
Re: Modifications, repairs and improvements, 28TE
That one engine zinc is a challenge for sure. On mine I'm able to get a flex head ratcheting wrench on it, and get maybe one to two clicks at a time. PITA, but doable for me w/o removing the cap or hoses.
Greg
2000 Albin 28 TE "Turtle Express"
2000 Albin 28 TE "Turtle Express"
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
You are good, or lucky
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
I tried different things over the years and found that removing hoses is quicker
than fighting the zinc for an hour trying to remove it without removing hoses and hose clamps.
Next time I will make a You-Tube video showing all the attempts including the swearing and cussing, then the resignation when I start pulling hoses..
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
Time for some house cleaning.
Expensive helm chairs, don't want to use the wrong cleaners/chemicals:
The maker said to use 409 solution as it is mild, and a soft brush.
Then when rinsed and dry: Use furniture wax to coat the naugahyde vinyl
Called Stidd and asked 'em, they will call the manufacture of the Naugahyde and check, then call me back,
Expensive helm chairs, don't want to use the wrong cleaners/chemicals:
The maker said to use 409 solution as it is mild, and a soft brush.
Then when rinsed and dry: Use furniture wax to coat the naugahyde vinyl
![Shocked :shock:](./images/smilies/icon_eek.gif)
Not sure if this is furniture wax and the correct product?To restore luster, a light coat of spray furniture wax can be used. Apply for 30 seconds and follow with a light buffing using a clean white cloth.
Called Stidd and asked 'em, they will call the manufacture of the Naugahyde and check, then call me back,
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
No recent updates as there has been no Modifications, Repairs or Improvements lately.
Instead we did a long trip, delivering the boat to our new home at Marina del Palma @ Palm Coast, FL. (From Fort Lauderdale, FL)
The trip was about 240 NM up the ICW and took 25 hours with 3 stops.
The boat has never been this heavy before, full fuel plus 10 gallons spare, full
water plus 14 gallons spare, reserve prop, reserve starter, tools and more spares.
3 guys and food, wine and beer of course.
Could only get 15.5 knots initially but as we got lighter it ran faster.
Fuel flow was less than before after I installed a new flow sensor and damper in the FloScan System. In the past max cruise would show 12 gph, now it is more like 10 and 1.60 mpg. Good news,
Instead we did a long trip, delivering the boat to our new home at Marina del Palma @ Palm Coast, FL. (From Fort Lauderdale, FL)
The trip was about 240 NM up the ICW and took 25 hours with 3 stops.
The boat has never been this heavy before, full fuel plus 10 gallons spare, full
water plus 14 gallons spare, reserve prop, reserve starter, tools and more spares.
3 guys and food, wine and beer of course.
Could only get 15.5 knots initially but as we got lighter it ran faster.
Fuel flow was less than before after I installed a new flow sensor and damper in the FloScan System. In the past max cruise would show 12 gph, now it is more like 10 and 1.60 mpg. Good news,
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Last edited by Norseman on Fri Jul 29, 2022 4:34 pm, edited 1 time in total.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
Arrived this morning at our new marina homestead and Odin got a pull from a huge forklift.
Sitting on the ramp for a quick wash, rinse and dry before it gets lifted into the hurricane rated boat house for secure storage. Less maintenance, less cleaning and less worry.
(Had my own backyard dock in Fort Lauderdale for 24 years, lots of work and worry every time there is a 'cane on the horizon and especially when we get a direct hit
)
Sitting on the ramp for a quick wash, rinse and dry before it gets lifted into the hurricane rated boat house for secure storage. Less maintenance, less cleaning and less worry.
(Had my own backyard dock in Fort Lauderdale for 24 years, lots of work and worry every time there is a 'cane on the horizon and especially when we get a direct hit
![Shocked :shock:](./images/smilies/icon_eek.gif)
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
Another mini-project today:
Starboard hull-side air vent showed streaks of rust and dirt below it:
Perhaps the spot welds on the vent didn't like salt water?
Ordered a new one and gave it a bath in WD-40.
(Water Displacement juice: https://www.wd40.com/history/)
I let the stuff soak in all the nooks and crannies for days in a plastic bath-tub: Installed today and cleaned the hull somehow. (need a dab of acid to get it 100% good, but enough for a 5 feet away inspection) Click on the pictures to get the correct orientation, the 90 degree off has been an ongoing problem..![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Starboard hull-side air vent showed streaks of rust and dirt below it:
Perhaps the spot welds on the vent didn't like salt water?
Ordered a new one and gave it a bath in WD-40.
(Water Displacement juice: https://www.wd40.com/history/)
I let the stuff soak in all the nooks and crannies for days in a plastic bath-tub: Installed today and cleaned the hull somehow. (need a dab of acid to get it 100% good, but enough for a 5 feet away inspection) Click on the pictures to get the correct orientation, the 90 degree off has been an ongoing problem..
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
- Swabby
- Posts: 2
- Joined: Tue Jul 26, 2022 5:40 am
- Home Port: Amity Harbor NY
Re: Modifications, repairs and improvements, 28TE
The shifter is backwards
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
Nope the shifter is exactly the way I want it.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
I noticed yesterday the coolant hoses from the Yanmar to the hot water heater do not have shut off valves. (So as to keep running the engine if the heater developes an interal coolant leak)
Does any other Albin have these valves? If not, did you install them? (my boat is a 2001 year model)
Does any other Albin have these valves? If not, did you install them? (my boat is a 2001 year model)
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
- RobS
- Gold Member
- Posts: 4041
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Modifications, repairs and improvements, 28TE
I had thought about adding those valves when I replaced the water heater on my 28 but decided just to carry the properly sized male to male coupling and figured if it ever became an issue was easy enough to cut those coolant loop hoses and join them together and close the engine loop.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
Odin was sold today to a couple in Jacksonville, FL.
I wish them the best of luck, and to the rest of you: Say hello to Chris.
I hope he will continue this thread and be as pleased as I was with the Albin 28TE. with the Yanmar.
Great combo, smooth running and very sea worthy.
I wish them the best of luck, and to the rest of you: Say hello to Chris.
I hope he will continue this thread and be as pleased as I was with the Albin 28TE. with the Yanmar.
Great combo, smooth running and very sea worthy.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
- Gold Member
- Posts: 1807
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: Modifications, repairs and improvements, 28TE
Chris got a great boat!
What's next for you?
What's next for you?
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- Norseman
- Gold Member
- Posts: 1698
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Modifications, repairs and improvements, 28TE
I will probably down-size to a 22"-24" single outboard center console runabout, probably brand new with tons of warranties on everything.
In a few months boat prices may be back to normal.
In the meantime I will bum boat rides from friends and neighbors: The best kind of boating you can do...
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.