Hello, all. I am getting ready to do the cutlass bearing on my 2022 28TE with the Yanmar 6LP. Te guy mentoring me though the job has asked for a picture/drawing/diagram/measurements on the prop shaft tube. Everything/anything would be helpful with respect to insight on this job and various measurements (shaft size, length, etc.).
Thanks!
Tim
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
28TE/Yanmar prop shaft tube
-
tpilczak
- Gold Member
- Posts: 5
- Joined: Tue Jun 01, 2021 11:11 am
- Home Port: Weymouth, MA