My 1983 27a/c has the Lehman/Hurth setup. The output shaft seal of the drive has failed and leaks. I have the gear (which works fine otherwise) removed and have learned that it is a bit onvolved to change seals as the entire unit required disassembly (and perhaps special tools).
Hoping for names of shops that WILL work on a Hurth Drive (Preferably NE area but anywhere else is welcome) -
Many Thanks
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site. Digests will be enabled soon.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Hurth transmission service - advice please
-
Don from Mystic
- Gold Member
- Posts: 118
- Joined: Thu Mar 06, 2008 12:54 pm
- Location: Sunny Mystic Connecticut.....